The coil unwinder SAR was developed as a cable supplier which delivers material from big coils without pulling force. Due to the contact-free-processing sag control, the isolation hose of the material cannot be damaged.
The material coil is lifted up by a pneumatic lift table (optionally) and positioned by the operator onto the two drive shafts. One of the drive shafts can be moved motorized (optional) to lift down the coil slowly into the unwinder unit. For fixation, the tapered brackets are pushed into the center holes. This enables the user to process also damaged wood and plastic coils.
Optionally, the unwinding speed can be controlled and optimized for the production flow by the sag control DHS1000 D or by the cable accumulator system KSP/LSP.
| SAR800 | SAR1000 | SAR1250 | |
| Drive motor: | three-phase motor | three-phase motor | three-phase motor |
| Speed: | max. 2.0 m/s | max. 2.0 m/s | max. 2.0 m/s |
| Length: | 1800 mm | 2000 mm | 2300 mm |
| Width: | 1760 mm | 1920 mm | 1980 mm |
| Height: | 1320 mm | 1440 mm | 1510 mm |
| Coil diameter / min: | 400 mm | 500 mm | 600 mm |
| Coil diameter / max: | 800 mm | 1000 mm | 1250 mm |
| Coil width / max: | 510 mm | 710 mm | 890 mm |
| Coil weight / max: | 500 kg | 500 kg | 500 kg |
| Compressed air supply with optional lifting device | optional 10 bar | optional 10 bar | optional 10 bar |
| Power supply: | 3 x 400 V, 50-60 Hz, 16 A | 3 x 400 V, 50-60 Hz, 16 A | 3 x 400 V, 50-60 Hz, 16 A |
| Adjustable axis: | OPTION | OPTION | OPTION |
| Weight: | 270 kg | 320 kg | 410 kg |
