Rotary cutting machine SMM40

The rotary cutting machine SMM40 has been designed to cut material such as plastic, rubber, shrinkable tube and similar material in extrusion process.

In order to evenly distribute the pressure force over the material, the SMM40 has been equipped with a particularly long pulling device. The belt-distance is adjusted mechanically by means of the hand wheel.

When processing with a motor driven fly cutter which produces a continuous pull, the SMM40 is able to cut short lengths at high extrusion speed. Alternatively, the machine can process in start-stop-mode to cut for example long lengths. The cutting blade is positioned in the cutting head and can easily be replaced.

Additionally, the SMM40 has been fitted with a motor driven rotating knife, which can also be used to cut in either start-stop-mode or continuous run. Operating speed and rotating direction can be selected.

Drive motor: servo
Cutting head: servo
Length: 1500 mm
Depth: 1000 mm
Height: 1800 mm
Control panel: membrane keyboard
Display: multilingual (selectable)
Operating hours and
counter:

included

Stop at end of material: included
Feeding rate: 80m/min
Operating direction: from right to left
Length input: 0.1 mm steps
max. length input: 999,999 mm
Upper belt lift: pneumatic
Throughput height/-width: up to 30 mm
Weight: 180 kg
Air supply: 6 bar / 87 psi
Power supply: 3 x 400 V / N / 50-60 Hz