The extremely reliable and solid cutting machine SM40 PLC has been designed to process a wide range of different materials. By use of the appropriate accessories, materials such as PVC hoses, textile tubes, rubber, ribbon cables, felt materials, foils, textiles, leather, materials of the medical field and further more up to a width of 400 mm can be processed with an optimal cut quality. There are two types of cutting tools available, as there are:
punching cut for hoses, foamed rubber cords and sealing profiles
shearing cut for ribbon cables, shrinkable tubes etc.
Adapted to the low heights of most broad products, such as woven fabrics or flat-ribbon cables, is the reduced stroke of the two pneumatic cylinders. This increases the efficiency of the SM40 PLC in terms of consumption and speed. The feed of the material is generated by a modern servo drive which, in combination with the PLC control system, enables high speed and precise positioning. The control system, available in several languages, is easy to use in everyday operation by entering the length and number of items, but can also be adapted to the specific material properties of the product.
The infeed side guides can be adjusted to the material width. The guides are available in different designs.
|Admission height:||15 mm|
|Admission width:||400 mm|
|Max. cable cross section:||70 mm² Cu stranded / 10 mm² Cu solid|
|Resolution length input:||0,1 mm|
|Max. length input:||99.999,9 mm|
|Max. feed:||1,0 m/s|
|Language:||DE, EN, FR, IT, SP, PORT, NL, CZ, POL, TY|
|Upper belt lift:||pneumatic|
|Operating hours, total piece counter:||included|
|Stop material end:||included|
|Air consumption cut:||6,7 l|
|Electricity supply:||230 V / 50-60 Hz (optional 110 V)|
|Compressed air supply||6 bar / 87 psi|
|Dimensions WxHxD:||730 x 560 x 660 mm|